Language
 |
| Melba Swintex is Flying the Kitemark™ |
|
During the past few months, Melba Swintex has had its Traffic Cone range put through tough and vigorous testing. These tests have been conducted by BSI, the national standards body of the United Kingdom, to the technical standards set out within their publications, these of which are recognised globally as the definition and guidelines of all Temporary Traffic Cones. Its now official we have the BSI Kitemark™ for our range of cones.
|
| Don’t Compromise on Quality.
Ensure the Traffic Cones you use carry the symbol of Quality. Look for both the Melba Swintex name, and the BSI Kitemark™ to fully guarantee a top quality product.
|
 |
 |
Keep it Real – Make it Melba Swintex
Melba Swintex has always had pride in the quality of its products, and has become recognised as the royal brand of Temporary Traffic Management. Now with the approval of an externally certified body, you can trust that the Melba Swintex Cone range will always get the job done.
|
|
As the standards published by the BSI are publicly available, any company can state claims of compliance to a standard for their product. However, these claims are often not validated by an independent organisation. The Kitemark™ on the Melba Swintex Cone range gives you the complete reassurance that it is regularly tested by BSI and meets the requirements of the standard. Read more about the Kitemark to fully understand its true significance. |
 |
 |
No Rising from the Ashes This Time
Relying on suppliers of the all metal Phoenix resulted in longer lead times, therefore we are moving away from the use of metal, and will focus on a completely plastic Litter Bin range.
|
| Manufacture Local
All of the Melba Swintex Litter Bin Range is now manufactured on site, and are available in a wide selection of colours. Company Branding can also be included on the each product.
|
 |
|
There will soon be a new member to the Litter Bin Range, so keep an eye out for it! |
 |
| In Case You Missed it… Here’s a run down of the year so far at Melba Swintex |
|
With fantastic new products, stunning lead times and standard items constantly replenished and kept in stock, it’s no wonder we are so busy. We therefore should look back on the year so far to see where the time has gone.
|
 |
January
Precisely 12 months from the its launch in 2015, the Tuff Trench was supplied with a bonus feature – The New Anti-Slip Rubber Pads that can be securely fixed to the underside of the Tuff Trench to prevent movement under windy conditions. |
| February
During February, the New Tuff Foot was released onto the Traffic Management market. The stylistic design supplies a hefty 10kgs to each barrier, resulting in greater wind resistance on the Melba Swintex Barrier range. |
 |
 |
March
The Postman system made its way onto our customer’s doorsteps. The system has proved to be a great success due to increasing demand & demanding lead times on the market. The Postman takes the current temporary barrier system within utility works, and updates it by implementing a range of innovative features & increasing its strength and durability. |
| April
We caught a short flight over to Amsterdam for a week to showcase at the Intertraffic Exhibition. This event allowed us to network into areas we had previously never ventured, and opened up doors to new opportunities, and friendships. This also allowed us to speak to consumers one-to-one and get feedback on our services.
|
 |
 |
May
The Fantastic Four was born with the addition to the Barrier Foot family with the New Tuff-AT Foot. This great new foot satisfies both the needs of extra weight, and reducing the risk of a trip hazard when on site. The foot also has a little trick up its sleeve – the possibility to emboss with corporate branding, putting your name in the spotlight. |
| June
‘You’re my Wonderwall’ was the phrase that was stuck in the heads of everyone here in the office. The WonderWall™ Barrier was released once again due to increasing interest and demanding lead times. The product has been a huge success and continues to impress. |
 |
 |
Coming this Autumn: |
The New 250mm High Reflective Vision Barrier made for the European Market
|
 |
Why 250mm?Various Standards in many European countries specify a depth of a minimum of 250mm for the top reflective area, and why not have a more reflective product? It’s safer for everyone. The spindles can even be made reflective for extra, extra visibility.
|
The Geeky Bit
|
 |
 |
Corporate Colours & IdentityCorporate identity is as important on the roadside as it is on high-visibility garments. The EuroVision can be colour coded, and/or embossed, to suit your corporate identity. We can match Pantone references, which can make your brand identity stand out and creates an increased reduction in Barriers being stolen or misappropriated.
|
|
Find out more about the UK version known as the Vision Barrier by heading over to its very own Product Page where you can access all of the required information. |
|
Melba Swintex have a wealth of experience in design and manufacture, and work alongside our customers to provide customised products for industry. |
 |
 |
 |
 |