1m Gate
It is the known standard for barrier systems to be 2 metres in length, however sometimes this footprint is a little too large, and a more compact system is required when space is key. Available on the market for quite some time now is our 1m Stacca Barrier, but now for the first time, we have upgraded the system to include a variant for our 2m Gate barrier – our bestselling barrier to date. This allows the 1m Barrier complete compatibility with the entire Melba Swintex Barrier range.

1m Stacca Connection
1M STACCA

The 1m Stacca variant incorporates the use of our S-Clip feature which allows compatibility with a range of our barriers such as: Master, Tuff, Olympic, and Buddha. As well as other barrier systems currently available.

1m Barrier Features
FEATURES

The only difference on the 1m Barrier is its method of connection, other than that all features are identical. Including the functionality for a Courtesy Sign that can be centrally attached to provide information to the public if required.

1m Gate Connection
1M GATE

The 1m Gate variant incorporates a Hook & Eye system identical to the 2m Gate Barrier system. This allows a quick an easy connection when deploying barrier, as well as maintaining connection on uneven ground.

1m Gate Barrier



Barrier Collection

DID YOU KNOW?

One of our specialities is on temporary Pedestrian Barrier and restraint systems, with a vast supply of solutions available. This includes a selection of Chapter 8 Barriers, Separators, barriers for Non-Highway use, and restraint systems for the International market.


To familiarise yourself with our full range, head over to the dedicated Barrier page which hosts a vast collection of information for each product available.




1m Stacca Barrier

The All New Q-Frame

 

An industry first from Melba Swintex, an all plastic Quick Fit Frame. Implementing the revolutionary Quick-Lock fasteners that are fitted as standard. These remain securely in place allowing a quick and easy sign face installation. The frame takes 300mm and 450mm centre sign plates. Black as standard with Corporate Branding and various all-through colour options available*.

Q-Frame Sign Sizes
Sign Faces

The Q-Frame comes with Quick-Lock fasteners installed at 300mm centres as standard, with the facility to move these into 450mm centre holes. These Quick-Lock fasteners have been carefully engineered to prevent any twists within the frame, ensuring an easy to install sign face every time.

Q-Frame Colours
Customisation

Manufactured in Black as standard, however with the facility to manufacture with your corporate branding colours without the need for any extra processes. As well as this, corporate branding can be embossed onto the front bottom leg of the frame reducing in theft. Minimum runs apply.

Q-Frame Collection

Q-Frame Construction
Deployment

Sophisticated form around the connection for the back legs ensures they do not come away in everyday use. With indication as to when the legs are in the open position, and a smart catch feature when in the home position.

Q-Frame Stacking
Transport

Unique to the Q-Frame is its ability to stack with itself, resulting in safer transport and utilisation of space more efficiently. 80 pieces to a pallet, with lighter-in-weight than its metal counterpart means less fuel required for transport.

Q-Frame Back

Testing

All portable road signs must conform to BS 8442:2015 to be used on British roads, and this includes the Q-Frame. The Q-Frame is the first quick fit frame variant that has been rigorously tested at the MIRA Wind tunnel facility, to determine the specific ballast requirement for each Wind Class.

 

Features
  • Takes 300 mm and 450 mm centre sign faces.
  • Revolutionary Quick-Lock fasteners.
  • Lighter than steel = less weight in vehicle.
  • Non-Metallic with no scrap value.
  • Non-Conductive.
  • 100% recyclable.
  • Stackable – 80 to a pallet.
  • Can be branded with customer logo. Minimum run applies.
  • Can be manufactured in corporate colours. Minimum run applies.

Q-Frame In Situ

Home Sweet New Home

Melba Swintex are delighted to announce the successful purchase of a new premises for their base of operations. Due to increasing restrictions of space and power, the company has seen such growth that the current site is no longer fit for purpose and are therefore in the process of relocating each machine to the new 17-acre site located in Ramsbottom.

The existing premises in Bury will cease association with Melba Swintex, and the target will be to have all operations fully up and running at the new premises as we enter into the New Year.

Throughout the move, the company will continue to trade as usual, with little to no interruptions noticeable.

Our New Address is as follows:

Melba Swintex
PO Box 700
Bury
BL8 9TX.

HOG600

Introducing the All New HOG600

A sturdy and long-lasting Water Separator which is quick and simple to install, as well as having the capacity to hold over 55 litres of water.

HOG600

The HOG600 has been designed to be completely anti-trip. By implementing a hook & eye system, each barrier is capable of connecting to the corresponding Separator with ample movement to create different angles.

Each Separator has the ability to increase its height with the addition of a Fence type barrier.

HOG600 Circle

Angular Movement

No corner buffers or additional equipment is required for tight corners or bends. The HOG600 has the angular freedom of over 235°. Six will make a mini roundabout.

Fill Area

Filling & Emptying

Each half of the HOG600 is separately filled from one another using water by utilising the entry points in each of the top corners.

Water Level

Maximum Level

A maximum level line is indicated on each side of the barrier. When a light source is placed on the inside wall, the water level becomes visible.

HOG600 Stacking

The HOG600 provides a vast variety of Benefits & Features. Head over to the dedicated product page to discover what makes it stand out from the rest.

Click Here for the HOG600 Website

Closed Loop Recycling

Melba Swintex has a 100% commitment to the environment and due to this, offers a closed loop recycling opportunity on the new HOG600 and all of our existing products. For more details on this, and how you can improve your carbon footprint, get in touch using the link below:

Reducing landfill one product at a time.

Get in Touch

the RightRamp

Introducing the New RightRamp from Melba Swintex. Designed in conjunction with the University of East Anglia, led by Dr Katherine Deane BSc PhD – Senior Lecturer in Research, and her team. The RightRamp has been specially designed and developed by focusing on people of varying abilities to overcome the issues that all current wheelchair ramps have.

Ramp Entry - Alternative

Existing Styles

Current Wheelchair Ramps force the user to approach the ramp straight on due to its high-rise walls either side. This can cause major issues when there is insufficient clearance for a wheelchair user to approach the ramp, as well as posing as a potentially serious trip hazard.

Ramp Entry - RightRamp

New Style

The RightRamp has been designed to sit up against the kerb, rather than over it, which allows the form of the ramp to blend from the road surface up onto the footway. The organic curvature of the ramp allows multiple angle access when approaching the ramp from both the road works, and the footway.

An even distribution of Anti-Slip Conical Technology over the entire upper surface of the ramp prevents any slips in dry and wet conditions. When tested to BS 7976 results show no significant slip hazard.

RightRamp Weights

4 completely recycled weights are fixed on the underside of the ramp that not only help anchor the ramp down, but also prevent the ramp from sliding by implementing Anti-Slip Conical Technology, and dramatically increases the ramps compression strength.

Tapping Rail

After extensive testing at the University of East Anglia, it was concluded that a 9mm tapping rail guided the visually impaired with ease, without creating a potential trip hazard for pedestrians, or issues for wheelchair users.

Kerb Heights

A series of trials were conducted at the University of East Anglia to determine the precise form that allows the smoothest transition onto and off the ramp for varying kerb heights. Working with manual & electric wheelchairs that consisted of both pneumatic and SRT tyres, the new design allows a wheelchair user to transition seamlessly onto and off the ramp at various heights.

RightRamp Palletised

The RightRamp boasts a variety of Benefits & Features, which are too many to contain within one email. Head over to the dedicated product page for the RightRamp to discover the story of the ramp, and what makes it stand out from the rest.


the RightRamp Product Page

The Tuff Tread

1200 x 800 Tuff Tread

Introducing the all new environmentally friendly Tuff Tread. A completely recyclable trench cover that conforms to the latest HAUC regulations. Manufactured from HDPE with a PVC skirting, this single-man lift cover is perfect for use as a Footway Board in utility & general street works.

For more information including test reports and datasheets:
Click here for the Tuff Tread web page.

Tuff Tread Testing

Tested in accordance to the latest HAUC regulations under the full guidance of Lloyds British, an accredited testing house with over 200 years experience in this field. The Tuff Tread can withstand a full working load of 400 kgs with minimal deflection, & 800 kgs with no sign of failure, over a trench span of 700mm. See the video above to find out more.

Tuff Tread Construction

The materials used in the manufacturing of the Tuff Tread are 100% recyclable which dramatically reduces the products ending up in landfill by using our closed loop recycling opportunity. Each Tuff Tread when recycled, can be used to manufacture: new products, cone bases, or even a new skirt for another Tuff Tread.

GRP is a Hazardous Material

Current covers are manufactured from GRP, which is composed of fine strands of glass fibre that are a severe irritant for skin. When the material breaks, there is a potential risk the glass fibres can become airborne, which poses a serious risk to existing respiratory problems.

GRP to Landfill

Existing GRP Trench Covers can break and fracture easily, so therefore must be replaced regularly. It is extremely difficult to recycle GRP, and due to this, most GRP products end up in landfill at their end of life.

Manufactured from Durable Materials

The Tuff Tread uses materials that have a high strength-to-density ratio. They are proven to last longer than GRP products. The material does not splinter, nor pose an irritant threat when exposed to contact with the skin. Maintenance of them is easy, and they can be wiped or washed clean if and when required.

Closed Loop Recycling Opportunity
Closed Loop Recycling

Melba Swintex has a 100% commitment to the environment and due to this, offers a closed loop recycling opportunity on the new Tuff Tread and all of our existing products. For more details on this, and how you can improve your carbon footprint, get in touch using the link below:

Reducing landfill one product at a time.


Get in touch.

 

alt_text

Come and see our range of new & exciting products!

You are invited to attend the most authoritative traffic technology exhibition in the world: Intertraffic Amsterdam 2018! Taking place Tuesday 20th March – Friday 23rd March.

Here we will be showcasing our innovating range of Temporary Traffic Management products. Come and chat with the team to learn of new developments and possible solutions for your business.

Registration is free, so what are you waiting for? Find us at stand 01.304 and we look forward to seeing you.


Click Here to Register

alt_text

Thor Barrier

The Thor Barrier

God like strength combined with Lightning fast production.
The NEW Thor Barrier is a highly robust and protective Barrier that can be deployed to guide vehicles and pedestrians on to the correct path when required. Over engineered to produce great strength, you’d need the HULK to knock it over when used with the 28 kg Footplate.


So why call it the Thor Barrier?
Thor Barrier
THOR V THOR

Norse God Thor Thor Barrier

Norse God Thor Thor Barrier

Norse God Thor Thor Barrier

Norse God Thor Thor Barrier

Find out more about the Thor Barrier by heading over to its very own Product Page where you can access all of the required information:


the Thor Barrier Web Page

Utility Barrier

Batman has his Utility Belt,
Melba Swintex has the Utility Barrier!
KAPOW!

Introducing the new Utility Barrier from Melba Swintex. Completely manufactured within the UK, this barrier offers ultimate protection with incredible lead times, corporate branding, and a vast selection of colours to choose from.

Utility Barrier

Utility Barrier

Utility Barrier

Other Benefits and Features of the Utility Barrier include, but is not limited to:
  • Manufactured in the Melba Swintex factory, in the UK.
  • Incredibly stable thanks to the D-Hinge™ & D-Clip™.
  • Facilty for a 600 x 450 courtesy sign.
  • Corporate branding can be embossed on Front & Back.
  • Can be coloured to suit corporate image.
  • Compatible with existing barriers on the market.
  • Manufactured from 100% recyclable material.
  • Higher reflective area to meet various legislations.
  • Deep channels to prevent collection of rainwater.
  • Incredibly durable & lightweight.
  • Product stacks with itself in every orientation.
  • 750mm or 1Mtr Versions available.
  • Reflective material can be added to the bottom panel.
  • Indoor & Outdoor use.
  • Can be supplied in panels of 3 or 4.
Utility Barriers

Find out more about the Utility Barrier  by heading over to its very own Product Page where you can access all of the required information.


the Utility Barrier Web Page.

Coming this Autumn:

The New 250mm High Reflective Vision Barrier made for the European Market

Don’t make us call it the EuroVision!!

(If you can think of better name please let us know )


Introducing the new reflectively enhanced Barrier system with a depth of 250mm retroreflective area. The Vision Barrier can connect to either itself or other existing barriers using the various attachment methods on offer.

Find out more about the UK version known as the Vision Barrier by heading over to its very own Product Page where you can access all of the required information. 


the Vision Barrier Page.

Melba Swintex have a wealth of experience in design and manufacture, and work alongside our customers to provide customised products for industry.