Front image of the Wheelchair Ramp with a blurred background of the ramp in Situ
The Melba Swintex Wheelchair Ramp, formerly known as the Kerb Buddy (hopefully a more successful rebrand than Twitter) has had a makeover. Now supplied by default, the Ramp is pre-fitted with four heavy-duty skirts that not only provide additional anti-slip support, but also allow for better anchorage upon deployment.

A close up single shot of the skirt used on the Wheelchair Ramp
Manufactured with high-precision, high-quality, and from completely recycled material, the skirt indicates the start and end of the Ramp, increasing safety on site.

Underside shot of the Wheelchair Ramp showing installed skirt
Two skirts on the underside of the skirt provide additional grip to the road and pavement surface, preventing any potential skidding out of place.

Cross-sectional image of the Ramp showing the fit of the skirts into the body
Each skirt sits securely flush with the outer surface of the Ramp so as not to pose a trip hazard, whilst at the same time providing additional grip to whichever materials come into contact.

Exploded view of the Ramp with dimensions to one side



A collection of stacked Wheelchair Ramps

FEATURES OF THE WHEELCHAIR RAMP


– 4 fixing holes. Can be bolted to the ground.
– Efficient anti-slip pattern with additional weighted skirts.
– Low edges for anti-trip.
– High rise sides to prevent falls.
– Able to withstand over 350 kgs.
– Company identification can be embossed.

And many many more. Head to the dedicated website page to find out: www.melbaswintex.com/wramp




A collection of Melba Swintex products all in situ with the Wheelchair Ramp centre

CityWall Red White Barrier with DoubleTop Products
Introducing the all New CityWall
A first from Melba Swintex and a first for the Traffic Management sector, the CityWall is a 2 metre Water filled separator with one key feature – an innovational twin-colour option never seen before in the industry, providing the ultimate brand identity on worksites and the like.

White Red CityWall Separator
STRUCTURE

At 2m in length and 0.8m in height, the CityWall is suited to heavy-duty, long-term projects. With high-impact, ultraviolet, and all-weather resistance, the CityWall is capable to withstand the test of time.

Inside of CityWall showing water
JUST ADD WATER

Highly detailed strengthening features allow the blow-moulded body to withstand great pressures. This detail allows for the capacity of up to 250 litres, resulting in at least an additional 250 kg of weight.

Filling Cap on the Base of the CityWall
FILLING

A heavy-duty cap found on either side of the body allows entry for a standard bowser nozzle allowing for a quick and easy fill.

Closeup of Embossing on the CityWall Base
EMBOSSING

Featuring our largest embossing area to date, either side can be branded with corporate logos and any additional detail required.

Bolt that connect top to bottom of the CityWall
FIXING

7 points of connection using highly robust steel bolts guarantee strength and longevity of the CityWall.

Run of CityWalls in White and Blue

DoubleTop and Mini-Doubletop stacked

COMPATIBILITY


If 0.8m in height isn’t enough, then the CityWall can be extended to 1.35 m and 1.8 m respectively via the addition of both the DoubleTop and Mini DoubleTop from Melba Swintex. Hole centres seen throughout the entire Separator range ensure compatibility amongst existing products. These two products also allow further customisation emphasizing brand identity throughout.

Run of CityWalls in Green and White with Green DoubleTop

Melba 46 Cone with No Waiting and Euro Band Cones

Since 1986, the one-piece traffic cone has been a staple of the Melba Swintex product range and has defined the Traffic Management sector. The high-demand for the 1-Piece Cone family has never been as high, and it is therefore with great delight that Melba Swintex introduce the Brand-New MELBA 46 Cone.

Stack of Traffic Cones
Thorough research into manufacturing processes and high-durability materials has resulted in the highest of quality 1-Piece Cone the industry has ever seen, with the improvement in design resulting in 500 pcs per pallet.

Stack of No Waiting Traffic Cones
Improving lead times with the purchase of new injection moulding machinery has vastly improved production speeds on the 1-Piece Cone family.

Embossing on a Traffic Cone
Utilising a blend of ultra grade recycled material, the MELBA46 provides a lightweight and durable, cost-effective Traffic Cone in all options..

Stack of Traffic Cones in a yard



MPL75 Traffic Cone

MPL75

 

With the introduction of new machinery, it has also been possible to double the production for the 1-Piece MPL75 Cone. By focusing on improving manufacturing techniques, production lead times have been vastly improved with customer satisfaction being key.




Stack of MPL75 Traffic Cones

Collection of Ramps
There are a multitude of instances where either access is required up a sudden step, or emergency piping that is temporary must be placed into oncoming traffic. Due to being specialists in high-compression materials, it is understandable that there are many solutions to these issues available from Melba Swintex.

Access & Square Access Ramps
ACCESS RAMPS

The Access Ramp range is available as a 4” or 6” product providing an easy solution to navigating those curb heights. Indoor or outdoor use, the self-weighted ramp can be placed into a linear run by implementing the interlocking feature, with a water channel provided if rain happens to be forecast (outside hopefully).

Yellow & Black Speed Ramps
SPEED RAMPS

The Melba Ramps are a heavy-duty solution to traffic calming and help discourage those eager drivers in travelling at speeds they shouldn’t be. With the 5cm suited to speeds of 15mph, and its counterpart at 7.5cm for 10mph, the ramps come in a black & yellow variation and are fitted with highly reflective road studs, so those eager beavers don’t have any excuse!

Car in driveway using Access Ramps to mount pavement

Collection of three Wheelchair Ramps
WHEELCHAIR RAMPS

Designed, tested, and approved by users with varying abilities, our wheelchair ramp range provides a secure and encouraging solution to navigating obstacles found within the traffic management world. All three ramps can be provided in a high-visibility yellow to ensure safety, and all with conformity to current legislation, the ramps ensure easy access around those street works.

Two black Cable Covers
CABLE RAMPS

Event organisers hate this one simple trick! Actually no, they love it. Two heavy-duty cable ramps provide protection for when you just can’t divert those important cables. With both an under or over solution, the ramps boast a high-compressive strength allowing traffic to pass over safely and with ease.

Custom Moulding Logo

TURN YOUR IDEA INTO REALITY

Think we’re missing a product? Then get in touch!

Our Custom Mouldings solution allows you to turn your idea into reality from the very start.


Click here for more information

Wheelchair ramp in use going up a kerb with roadworks

Driveway Board
ALL NEW Driveway Board from Melba Swintex

The Driveway Board is the first blow moulded board of its type. Tested under strict laboratory conditions, the board has been approved to the current HAUC specification. As well as it’s great strength and durability, the board is also 100% recyclable.

Driveway Board Underneath

Sophisticated design on the underside of the board, complete with high-strength bars supply additional strength resulting in the board capable of supporting heavy loads. With the addition of a deavy-duty PVC skirt that adds unparalleled grip to prevent movement of the board.

Driveway Board Exploded View

All materials used on the driveway board are 100% recyclable. By using Melba Swintex closed-loop recycling this eliminates sending the boards to landfill, each Driveway Board when recycled, can be used to manufacture new products, cone bases, or even a new skirt for another Driveway Board.

Driveway Board in Situ

Driveway Board Tread Pattern

With safety at the forefront, careful research & design has been focused on the top surface pattern to ensure the best distribution of detail to allow a good grip for both footwear and tyres. Directional arrows have also been implemented to communicate the correct orientation of the board.

Driveway Board Testing

Tested in accordance with the latest HAUC regulations, the Driveway Board can withstand a full working load of 875 kgs with minimal deflection, & up to 1750 kgs with no sign of failure, over a trench span of 700mm.

Driveway Board

  • HAUC Compliant
  • Supports a 4 tonne vehicle
  • PVC Skirt for increased grip
  • Anti-Slip pattern & Anti-Trip edges
  • Directional arrows for ease of installation
  • 4 fixing holes
  • Corporate logos can be embossed*
  • Manufactured in yellow for high visibility, Corporate colours are also available *
  • 100% Recyclable
  • Built in handles for easy lifting
  • Manufactured in High Density Polyethylene & recycled PVC

Driveway Board and Tuff Tread

Postman Barrier System
THE POSTMAN SYSTEM

Transformed throughout the years and regarded as a classic in the world of temporary barriers, our Postman system strives on to provide solutions to the Utility Sector. Continuous improvements in manufacturing quality result in a robust system with a fast-manufacturing turnaround.

The system can be colour coded to brand colours, as well as each part having the ability to be branded with contractors information. Minimum runs apply.

Postman Barrier Base
THE BASE

The Postman Base is the corner stone to the Postman system. By providing 4 kg in weight each time, and by having a reasonably sized footprint, stability is provided for the standard system setup. Manufactured from 100% recycled material, which is also 100% completely recyclable.

Postman Barrier Plank
THE PLANK

Available in 3 lengths, the Postman Plank is superior in strength than a standard uPVC Plank. Smart detailed design has resulted in a high impact resistant product, allowing for a much greater life span. Blow moulded from Virgin materials, which are 100% recyclable.

Postman Barrier Post
THE POST

The Postman Post is blow moulded from 100% Virgin material, which is 100% recyclable. The tessellated profile at the base allows for a smart and secure fit into the Postman Base, this also provides great strength. A small lip is present at the top which allows a secure fit for a lamp if desired.

Postman Anti-trip Base

ANTI-TRIP BASE

An Anti-trip version of the Postman Base is available to provide increased safety when the working area is restricted in size. Both Bases implementing an easy-carry handle to aid installation.

For more information, head over to the dedicated page on our website located here.

Postman System Setup

Gate Barrier
MINIMAL LEAD TIMES – GET THEM HERE FIRST

The Gate Barrier is one of the original Chapter 8 barriers on the market, and our most popular barrier ever. These past few months we have invested heavily in new tooling which has seen lead times for the Gate massively reduced.

So get your orders in ready for all of those upcoming events we can all once again enjoy!

Gate Connection
Connection from barrier to barrier is quick and simple with an easy drop and secure solution, that allows for uneven ground and varying kerb heights.

Gate Courtesy Sign
Four Location lugs within the windows of the barrier allow for the attachment of a courtesy sign, providing the option for extra information if required.

Gate Embossing
Various customisation options are available for the barriers, including bespoke colours and corporate identification embossed onto the front of the barrier.

Gate Ballast Options

Like with all Melba Swintex barriers, there is an abundance of heavy-duty foot options as well as methods for ballasting for those high wind speed applications.



For more information on Wind Speed Classes, and how we successfully tested the Gate Barrier at the only full-scale wind tunnel within the UK, click here.

Gate In Situ

Thor & Hammer - No Metal

Originally both our Thor & Hammer barriers implemented steel legs and rivets within its construction. However, these unprecedented times have seen costs and lead times dramatically increase for metal, and we saw this as a key time to take advantage of the situation. We have developed our very own HDPE leg which provides the same high performance and strength, with increased safety in Barrier collisions.

Barrier Hook

All Hooks are manufactured from Polypropylene and attached with the use of Tri-fold rivets allowing a quick and easy connection from barrier to barrier.

Barrier Tube

We have designed and engineered our very own barrier foot manufactured from HDPE at the Melba Swintex factory, providing the same high-quality performance as its metal counterpart.

Customisation Options

Various customisation options are available on both barriers so if you have a specific request then feel free to get in touch to find out what can be done.

Base Options

Melba Swintex supply a vast variety of heavy-duty Bases with which we would not want to fill up your Inbox with listing each and every one, therefore all of our Bases can be found online via our website. www.mebaswintex.com

Have a different Base requirement that we have somehow missed? Get in touch and we will look towards a solution together: sales@melbaswintex.com

Thor & Hammer - Same Performance


1m Gate
It is the known standard for barrier systems to be 2 metres in length, however sometimes this footprint is a little too large, and a more compact system is required when space is key. Available on the market for quite some time now is our 1m Stacca Barrier, but now for the first time, we have upgraded the system to include a variant for our 2m Gate barrier – our bestselling barrier to date. This allows the 1m Barrier complete compatibility with the entire Melba Swintex Barrier range.

1m Stacca Connection
1M STACCA

The 1m Stacca variant incorporates the use of our S-Clip feature which allows compatibility with a range of our barriers such as: Master, Tuff, Olympic, and Buddha. As well as other barrier systems currently available.

1m Barrier Features
FEATURES

The only difference on the 1m Barrier is its method of connection, other than that all features are identical. Including the functionality for a Courtesy Sign that can be centrally attached to provide information to the public if required.

1m Gate Connection
1M GATE

The 1m Gate variant incorporates a Hook & Eye system identical to the 2m Gate Barrier system. This allows a quick an easy connection when deploying barrier, as well as maintaining connection on uneven ground.

1m Gate Barrier



Barrier Collection

DID YOU KNOW?

One of our specialities is on temporary Pedestrian Barrier and restraint systems, with a vast supply of solutions available. This includes a selection of Chapter 8 Barriers, Separators, barriers for Non-Highway use, and restraint systems for the International market.


To familiarise yourself with our full range, head over to the dedicated Barrier page which hosts a vast collection of information for each product available.




1m Stacca Barrier

The All New Q-Frame

 

An industry first from Melba Swintex, an all plastic Quick Fit Frame. Implementing the revolutionary Quick-Lock fasteners that are fitted as standard. These remain securely in place allowing a quick and easy sign face installation. The frame takes 300mm and 450mm centre sign plates. Black as standard with Corporate Branding and various all-through colour options available*.

Q-Frame Sign Sizes
Sign Faces

The Q-Frame comes with Quick-Lock fasteners installed at 300mm centres as standard, with the facility to move these into 450mm centre holes. These Quick-Lock fasteners have been carefully engineered to prevent any twists within the frame, ensuring an easy to install sign face every time.

Q-Frame Colours
Customisation

Manufactured in Black as standard, however with the facility to manufacture with your corporate branding colours without the need for any extra processes. As well as this, corporate branding can be embossed onto the front bottom leg of the frame reducing in theft. Minimum runs apply.

Q-Frame Collection

Q-Frame Construction
Deployment

Sophisticated form around the connection for the back legs ensures they do not come away in everyday use. With indication as to when the legs are in the open position, and a smart catch feature when in the home position.

Q-Frame Stacking
Transport

Unique to the Q-Frame is its ability to stack with itself, resulting in safer transport and utilisation of space more efficiently. 80 pieces to a pallet, with lighter-in-weight than its metal counterpart means less fuel required for transport.

Q-Frame Back

Testing

All portable road signs must conform to BS 8442:2015 to be used on British roads, and this includes the Q-Frame. The Q-Frame is the first quick fit frame variant that has been rigorously tested at the MIRA Wind tunnel facility, to determine the specific ballast requirement for each Wind Class.

 

Features
  • Takes 300 mm and 450 mm centre sign faces.
  • Revolutionary Quick-Lock fasteners.
  • Lighter than steel = less weight in vehicle.
  • Non-Metallic with no scrap value.
  • Non-Conductive.
  • 100% recyclable.
  • Stackable – 80 to a pallet.
  • Can be branded with customer logo. Minimum run applies.
  • Can be manufactured in corporate colours. Minimum run applies.

Q-Frame In Situ