Traffic > Barriers > Tuff Barrier
Tuff Barrier

The Tuff Barrier is a stylish, tough and durable barrier. Incorporating the Q-Clip, the barriers connect together in a linear row, When combined with the Cross-Trench support, the barriers become highly wind resistant.


Manufactured from virgin HDPE.
600 x 450 sign facility.
Moulded in orange as standard, but can be coloured to suit.
When combined with Cross-Trench Support, the stability is greatly improved, and has extremely good resistance to high winds.
Q-Clip for barrier to barrier connection.
Barrier may be coloured.
Compatible with Master (Stacca) barrier.
Customer identification can be embossed.


Conforms to requirements of BSEN8442
Reflectivity requirements of BSEN12899-1
Chapter 8 - The Traffic Signs Manual
Safety at Street Works & Road Works
   – A Code of Practice.
Traffic Signs Regulations & General Directions

Spec Sheet:



Wind Resistance

All temporary traffic barriers must be able to withstand three different classes of wind speeds with the use of a ballast. The standard BS 8442:2015 states the three classes as the following:

Class A: 26.3 m/s (58 mph)
Class B: 17.6 m/s (39 mph)
Class C: 8.7 m/s (19 mph)

The Tuff Barrier system was tested under strict conditions at the Full Scale Wind Tunnel at Mira to determine at which wind speeds the barrier can withstand. Below are the results and guides as to the recommended ballast weight for each Wind Class:

Class C
Withstood up to 19.8 mph.
Recommended Ballast Weight: 0 kg
Class B
Withstood up to 44.2 mph.
Recommended Ballast Weight: 30 kg
Class A
Withstood up to 61.7 mph.
Recommended Ballast Weight: 90 kg
Road Rock
Withstood up to 44.2 mph.
Recommended Ballast Weight: 0 kg
Boxed with Road Rock
Withstood up to 63.4 mph.
Recommended Ballast Weight: 0 kg
Images are for representation purposes only.