Traffic > Barriers > Master Barrier
Master Barrier

The Master Barrier is our most successful barrier, with it’s high tensile strength and lightness, it makes it the perfect barrier for any form of utility works. The addition of anti-trip feet allow pathways to be kept clear for pedestrian access.


Free standing with 360° swivel feet.
Free from screws and rivets.
Moulded in orange as standard, but can be coloured to suit.
Feet can be coloured to suit.
Barrier to barrier connection is quick and easy for use on uneven ground.
Information sign can be attached.
Reflective strip at top and bottom.
Company identification can be embossed.
Manufactured from virgin HDPE.
Bottom reflective strip if requested.


Conforms to requirements of BSEN8442
Reflectivity requirements of BSEN12899-1
Chapter 8 - The Traffic Signs Manual
Safety at Street Works & Road Works
   – A Code of Practice.
Traffic Signs Regulations & General Directions

Spec Sheet:



Wind Resistance

All temporary traffic barriers must be able to withstand three different classes of wind speeds with the use of a ballast. The standard BS 8442:2015 states the three classes as the following:

Class A: 26.3 m/s (58 mph)
Class B: 17.6 m/s (39 mph)
Class C: 8.7 m/s (19 mph)

The Master Barrier system was tested under strict conditions at the Full Scale Wind Tunnel at Mira to determine at which wind speeds the barrier can withstand. Below are the results and guides as to the recommended ballast weight for each Wind Class:

Class C
Withstood up to 19.3 mph.
Recommended Ballast Weight: 0 kg
Class B
Withstood up to 44.5 mph.
Recommended Ballast Weight: 30 kg
Class A
Withstood up to 60.3 mph.
Recommended Ballast Weight: 90 kg
Road Rock
Withstood up to 44.5mph.
Recommended Ballast Weight: 0kg
Boxed with Road Rock
Withstood up to 62.1 mph.
Recommended Ballast Weight: 0 kg
Images are for representation purposes only.