Collection of Ramps
There are a multitude of instances where either access is required up a sudden step, or emergency piping that is temporary must be placed into oncoming traffic. Due to being specialists in high-compression materials, it is understandable that there are many solutions to these issues available from Melba Swintex.

Access & Square Access Ramps
ACCESS RAMPS

The Access Ramp range is available as a 4” or 6” product providing an easy solution to navigating those curb heights. Indoor or outdoor use, the self-weighted ramp can be placed into a linear run by implementing the interlocking feature, with a water channel provided if rain happens to be forecast (outside hopefully).

Yellow & Black Speed Ramps
SPEED RAMPS

The Melba Ramps are a heavy-duty solution to traffic calming and help discourage those eager drivers in travelling at speeds they shouldn’t be. With the 5cm suited to speeds of 15mph, and its counterpart at 7.5cm for 10mph, the ramps come in a black & yellow variation and are fitted with highly reflective road studs, so those eager beavers don’t have any excuse!

Car in driveway using Access Ramps to mount pavement

Collection of three Wheelchair Ramps
WHEELCHAIR RAMPS

Designed, tested, and approved by users with varying abilities, our wheelchair ramp range provides a secure and encouraging solution to navigating obstacles found within the traffic management world. All three ramps can be provided in a high-visibility yellow to ensure safety, and all with conformity to current legislation, the ramps ensure easy access around those street works.

Two black Cable Covers
CABLE RAMPS

Event organisers hate this one simple trick! Actually no, they love it. Two heavy-duty cable ramps provide protection for when you just can’t divert those important cables. With both an under or over solution, the ramps boast a high-compressive strength allowing traffic to pass over safely and with ease.

Custom Moulding Logo

TURN YOUR IDEA INTO REALITY

Think we’re missing a product? Then get in touch!

Our Custom Mouldings solution allows you to turn your idea into reality from the very start.


Click here for more information

Wheelchair ramp in use going up a kerb with roadworks

Multifit Base

18KG MULTIFIT

Introducing the Holiest of Holy Bases, the New Multifit Base. Taking the aesthetics of the standard Fence Bases seen globally and fusing together with a plethora of hole sizes for various types of demarcation. The 18kg Base will be sure to support your temporary work requirements.

Thor Multifit
Ø45MM

Four location points measuring at 45mm in diameter allow compatibility with the Thor and Hammer Barrier range, as well as other heavy duty barriers seen globally.

Fence Multifit
Ø38.3MM

Four smaller holes can be found merged with the 45mm variants allowing compatibility with the DoubleTop and other standard metal fencing panels with 38.3mm diameter tubing.

Beacon Multifit
SQUARED

Both 40x40mm & 60x60mm seen throughout the Base range has been included, allowing the possibility of the installation of standard Beacons at the same time as the Barrier system itself.

Multifit Holes



Multifit Stacking

CUSTOMISE IT

We dedicate a lot of attention to customisation options, and with this being a Melba Swintex product, this is certainly the case. Each end of the Multifit can be coloured to your branding options, as well as the feature to emboss your corporate identification on the top face. Stacking is easy with no pallets required, and 2 forklift slots allow easy transportation in bulk quantities.




Multifit Combination

Melba Swintex Base Collection

As we look forward to the Summer months that are now upon us, now would be the ideal time to prepare for the Winter season. Unpredictable weather brings unpredictable winds, and what better way to ensure the stability of your temporary barriers than the use of the Melba Swintex Heavy Duty Footplates, as well as our extensive range of Bases?

25kg Footplate

The 25kg Footplate supplies a substantial ballast to various traffic marking products. 5 separate hole locations provide multifunctional use, as well as 2 areas for personalised company identification. 4 easy-carry handles allow a smooth transition from the work vehicle to the installation site.

28kg Footplate

The 28kg Footplate is the big brother to the 25kg, with almost identical features, whilst also providing that little bit of extra weight for peace of mind. As well as incorporating features to secure standard beacon sizes seen throughout Europe, the Footplate features a housing compartment for any loose batteries if required.

Fence Base MKII

Need something a little lighter? The Fence Base MKII is suited for the mobile fencing market. Supplying a weight of 18kg, and 16 standardised holes ensures suitability for most construction jobs.

Q-Weight

For additional weight onto our Q-Sign range, the Q-Weight provides the perfect solution. Locating with ease onto the back leg, the Q-Weight reduces the chances of movement from the sign.

Road Rock

The Road Rock provides a whopping 15kg each, as well as a vast selection of uses. Its primary use is as a ballast to the Melba Swintex Barrier range, keeping them upright in Class A wind speeds.

Custom Moulding

Got a Base in mind?

If you have your own heavy-duty Base and are having difficulties with lead times and quality, then Melba Swintex offer their very own Custom Moulding service to assist you. Get in touch today to discuss this opportunity by contacting the link below:


Contact Our Custom Moulds Team Here

Stay Tuned!

We’ve got some very big news to announce soon, so make sure to stay signed up to our newsletter so that you don’t miss anything. We’re very excited and we hope to have you join us on this big and upcoming adventure. Keep an eye on that Inbox, it’ll be with you soon.

Tuff-AT Header

Happy Feet meets the Fantastic 4  –
Episode 4: Keep Your Barriers Happy!

Introducing the New Tuff-AT Foot.

In the world of Barrier feet, the Terrifying Trio have dominated the market, but now, they have a new member – Welcome to The Fantastic Four.

Tuff-AT Foot

Standard Foot

Anti-Trip Foot

Tuff Foot

Each Foot Does the Following:

  • Foot can be coloured to suit. This can compliment Brand Image.
  • Manufactured from recycled material and can be completely recycled again.
  • Allows barriers to stack by turning inwards, excellent for transport.
  • Each foot can swivel 360° for those awkward environments.

Review Each Foot in High Detail Using the Link Below:
the  Barrier Feet Page.