Collection of Ramps
There are a multitude of instances where either access is required up a sudden step, or emergency piping that is temporary must be placed into oncoming traffic. Due to being specialists in high-compression materials, it is understandable that there are many solutions to these issues available from Melba Swintex.

Access & Square Access Ramps
ACCESS RAMPS

The Access Ramp range is available as a 4” or 6” product providing an easy solution to navigating those curb heights. Indoor or outdoor use, the self-weighted ramp can be placed into a linear run by implementing the interlocking feature, with a water channel provided if rain happens to be forecast (outside hopefully).

Yellow & Black Speed Ramps
SPEED RAMPS

The Melba Ramps are a heavy-duty solution to traffic calming and help discourage those eager drivers in travelling at speeds they shouldn’t be. With the 5cm suited to speeds of 15mph, and its counterpart at 7.5cm for 10mph, the ramps come in a black & yellow variation and are fitted with highly reflective road studs, so those eager beavers don’t have any excuse!

Car in driveway using Access Ramps to mount pavement

Collection of three Wheelchair Ramps
WHEELCHAIR RAMPS

Designed, tested, and approved by users with varying abilities, our wheelchair ramp range provides a secure and encouraging solution to navigating obstacles found within the traffic management world. All three ramps can be provided in a high-visibility yellow to ensure safety, and all with conformity to current legislation, the ramps ensure easy access around those street works.

Two black Cable Covers
CABLE RAMPS

Event organisers hate this one simple trick! Actually no, they love it. Two heavy-duty cable ramps provide protection for when you just can’t divert those important cables. With both an under or over solution, the ramps boast a high-compressive strength allowing traffic to pass over safely and with ease.

Custom Moulding Logo

TURN YOUR IDEA INTO REALITY

Think we’re missing a product? Then get in touch!

Our Custom Mouldings solution allows you to turn your idea into reality from the very start.


Click here for more information

Wheelchair ramp in use going up a kerb with roadworks

Melba Swintex Cylinders
The Cylinder range from Melba Swintex is a quick-to-install, simple solution for a temporary walkway, cycle lane, or similar. The highly durable Cats-Eye Base secures into the ground, and with a simple twist, the cylinder is locked into position. All cylinders come supplied with a highly prismatic sleeve which gives a complete 360° visual indication, with the option of custom printing if desired.

Swinbac
SWINBAC

 

A self-righting Cylinder with little to no maintenance required. The construction at the base of each Swinbac Cylinder implements an elastic banding housed within a tough and durable chamber. When the Cylinder is hit at with force, the elastic allows the Cylinder to flex over on itself, and then immediately self-right to its vertical position.

Kingpin
KINGPIN

 

A lightweight cylinder that is perfect for managing the direction of traffic. Manufactured to be tough and durable, with little to no maintenance. The Kingpin is the simplest of Cylinders, designed to release when struck with impact, which can then easily be reinstalled once again. A permanent lock can also be implemented if required.

Flexi
FLEXI

 

The Flexi Cylinder is a one-piece Cylinder that is capable to self-right when struck with force. Its concertina like design allows material to compress at the base of the Cylinder from any angle, then due to the memory of the material, returns to its original form.

ARIANE & PHOENIX

 

The Ariane implements the twist-lock mechanism seen on the existing Cylinder range allowing the Cylinder to be locked into the Melba Swintex Cats-Eye Base, whereas the Phoenix has a flat base bundled with a locking bolt and nut. Handles have been implemented to allow greater grip for when attaching the Cylinders to their base, as well as the option to emboss with company branding.

All Cats-Eye Bases can be supplied with anchor bolts, or adhesive pads to ease the installation.

Instructions for installation can be found on our website here.

Ariane Installation - Trafford Centre

Utility Barrier

Batman has his Utility Belt,
Melba Swintex has the Utility Barrier!
KAPOW!

Introducing the new Utility Barrier from Melba Swintex. Completely manufactured within the UK, this barrier offers ultimate protection with incredible lead times, corporate branding, and a vast selection of colours to choose from.

Utility Barrier

Utility Barrier

Utility Barrier

Other Benefits and Features of the Utility Barrier include, but is not limited to:
  • Manufactured in the Melba Swintex factory, in the UK.
  • Incredibly stable thanks to the D-Hinge™ & D-Clip™.
  • Facilty for a 600 x 450 courtesy sign.
  • Corporate branding can be embossed on Front & Back.
  • Can be coloured to suit corporate image.
  • Compatible with existing barriers on the market.
  • Manufactured from 100% recyclable material.
  • Higher reflective area to meet various legislations.
  • Deep channels to prevent collection of rainwater.
  • Incredibly durable & lightweight.
  • Product stacks with itself in every orientation.
  • 750mm or 1Mtr Versions available.
  • Reflective material can be added to the bottom panel.
  • Indoor & Outdoor use.
  • Can be supplied in panels of 3 or 4.
Utility Barriers

Find out more about the Utility Barrier  by heading over to its very own Product Page where you can access all of the required information.


the Utility Barrier Web Page.